您好,歡迎訪問廣西華工重工升降設備廠官網!
登車橋http://m.8kvv.com/在使用過程中會由于操作不當或者零件老化造成系統短路,下面濟南榮凱升降機械的專家給大家介紹一下登車橋短路的兩種情況。
1、登車橋局部短路,表現為登車橋觸點粘合,開關不釋放、電梯失控等方面。這種短路產生的電流不大,熔斷器不會被燒損,可根據這一繼電器的有關登車橋電路進行分段斷開,逐步將故障排除。
Ramps partial short, the performance bond Ramps contact switch is not released, the elevator out of control and so on. This short-circuit current is not generated, the fuse will not be burning, can be segmented according to the relevant Ramps off the relay circuit, gradually troubleshooting.
2、登車橋http://m.8kvv.com/電源短路,這種短路由于會產生極大電流能見熔斷器熔體燒毀,故障現象明顯,請及時聯系登車橋生產廠家排除故障。
Ramps power short circuit, the short circuit current will produce great visibility since the melt fuse burned, symptoms clear Ramps please contact the manufacturer for troubleshooting.
公司名稱:廣西華工重工升降設備廠
聯系人:鄭經理
手機號:18878881055
座機:0771-3366627
郵箱:584649766@qq.com
地址:廣西南寧市青秀區仙葫經濟開發區開天路23號
手機移動端
微信掃一掃