交流電和直流電兩用型升降舞臺操作方式解析

升降舞臺操作方式為電動式，上升時按“上升”按鈕，下降時按“下降”按鈕，平臺臺面上和平臺控制箱上均有操作按鈕，操作時至少2人操作，1人地面，1人平臺臺面上。充電完成：關閉“外接電源開關”并拔下外接電源插頭，使用行走功能。
Lifting stage operation for electric type, press "up" button to rise, according to the "down" button down, have the operation button platform table and platform control box, the operation of at least 2 operation, 1 floor, 1 people on the platform surface. Charging complete: close the external power switch and pull off the external power plug, the use of walking function.

使用外接電源時：先關閉平臺控制箱內部的“24V電源開關”，再打開控制箱內部的“220V電源開關”，然后插上外接電源插頭，方可正常使用。
The use of an external power supply: first off the platform control box inside the "24V power switch, then open the control box" internal "220V power switch", and then plug the external power plug, can be normal use.

使用升降舞臺時：先關閉控制箱內的“220V電源開關”，拔下外接電源插頭，再打開控制箱內的“24V電源開關”方可正常使用，再打開平臺外側的“電瓶電源開關”方可使用行走功能，利用倒順開關控制行走、后退，握住牽引桿轉向把手，緩慢擰動油門線，使升降臺實現前走或后退，轉彎等功能。
The use of lifting stage: the first close the control box "220V power switch", unplug the external power plug, then open the control box of the "24V power switch" can be normal use, then open the platform outside of the "battery power switch" can be used for walking function, the use of reverse switch control, walking back, hold traction rod steering handle, slow twist throttle line, make the lifting platform to achieve ahead or back, turning function.

使用升降舞臺時，當設備出現升降緩慢或點擊明顯無力時，需及時給電瓶充電。充電時先把24V電源開關關閉，然后打開220V電源開關，把外置插頭插入220V電源中，即實現充電，注意：充電時嚴禁升降臺操作作業!電瓶充電時間嚴禁超過8小時。
Using the lifting stage, when the equipment lifting slowly or click on the obvious weakness, the need for timely to charge the battery. When charging the first 24V power switch off, then open the 220V power switch, plug the plug into the 220V power supply, namely realizing charging, note: lifting platform operation is prohibited when charging the battery charging time is strictly prohibited! More than 8 hours.

使用前請先空車試機、運行正常方可上人使用!操作員需經過培訓考核后方可從事平臺操作!平臺未撐支腿嚴禁使用!斜坡嚴禁使用!